On order! / AJAX Smart control panel for security systems / Hub / white / 856963007071

AJAX Smart control panel for security systems / Hub / white / 856963007071

Hub

The Hub intelligent control panel is a key element of the Ajax security system. The device monitors operation of all Ajax detectors and immediately sends an alarm signal to the owner and the Central Monitoring Station.

Installation and set up

Ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. It can be mounted in just a few minutes using the SmartBracket mount.

Safe home and office automation

Boost the potential of your security system with scenarios to actively resist the threats it detects and automate your routines. Set up a Night mode activation on schedule; turn off all the office lights automatically by arming the system; program the outdoor lights to spotlight trespassers when they trigger an outdoor motion detector; or install a sustainable anti-flood system. The system continues to execute scenarios even if the connection with Ajax Cloud is lost.

Technical specifications

Classification: The radio channel central unit with GSM and Ethernet modules
Installation: Indoors
Connected devices: 100
Users: 50
Rooms: 50
Groups: 9
Mobile Apps: iOS 13.0 and later; Android 5.0 and later
Communication channels: Ethernet, GSM (850/900/1800/1900 MHz)
Alarm signal: Delivery time: 0.15 s
Types of notifications: SMS message, call, push
Communication with Central Monitoring Station: Contact ID, SIA
Processor: ARM
Operating system: OS Malevich

Power supply: 
110-250 V from mains or 12 V when using 12V PSU for Hub/Hub Plus/ReXBuilt-in back-up battery: Li-Ion 2 А·h
Up to 15 hours of offline operation when the Ethernet is switched off
Energy consumption from the grid — 10 W

Jeweller radio technology
Communication range with detectors — up to 2,000 m in an open space
Two-way communication between devices
Radio frequency bands:
866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
(depends on the region)
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Frequency hopping

SIM card support: Micro SIM 2G
Operating temperature range: From -10°С to +40°С

Anti-sabotage
Protection against fraud
Jamming detection
Tamper-resistant
Video surveillance
Up to 10 cameras or DVRs
Remote set up: +

Dimensions: 163 × 163 × 36 mm
Weight: 350 g
Connected ReX: 1
Connected sirens: up to 10
Scenarios: 5
MotionCam detectors support: No

More information

Ajax Hub — smart control panel for security alarms

The control panel of the security alarm system is used to receive and then process signals from sensors for various purposes. The control panel is the primary device in the security system, which determines the functionality of the installed alarm. To choose a central, you need to decide on their main types and possible functionality.

The principle of operation of burglar alarm control panels

In the calm mode, the intrusion alarm control panel monitors the state of the security system sensors and connection lines. When an alarm occurs or a change in the parameters of the devices occurs, the control panels of the control panels send messages to the keypad indication panel or sounders. If the installed security system is connected to the central console of the security company, messages are sent there as well.

Smart control panel for security alarm Ajax Hub

The Ajax Hub smart alarm control panel controls the accurate monitoring of all connected Ajax devices using the Jeweler radio protocol. It immediately sends an alarm signal to all users of the system and the security console. Jeweller radio technology allows you to monitor the operation of security system sensors at a distance of up to 2000 m, provided there are no obstacles. Jeweller translates the entire system to clean frequencies when jamming the radio signal. The performance of the sensors is checked by pings at least every 12 seconds. Ajax Hub collects information about the operation of connected sensors in encrypted form, after which it analyzes the received data and, in the event of an alarm, immediately informs system users about the danger and directly to the security console. To send alarms, Ajax Hub uses two communication channels: GSM or Ethernet for SMS messages, push notifications or phone calls, respectively. The device package includes:

• The Ajax Hub itself.

• A power cable.

• An Ethernet cable to connect the hub to the Internet.

• A mounting kit.

Ajax Hub installation and mounting The Ajax Hub control panel is installed on the SmartBracket mount, and the configuration is done using a mobile application through which sensors are connected. Before adjustment, the sensors, the response zone and the noise level are remotely tested.

Features of the Ajax Hub alarm control panel

• The Ajax Hub central works up to 15 hours from the built-in backup battery.

• Geofence technology reminds users to turn on the alarm when they leave the premises and turn it off when they return.

• The Ajax Hub alarm control panel serves up to 100 devices.

• The ability to connect video surveillance through cameras that support the RTSP stream.

• It is possible to connect up to 50 users and a security company to the monitoring system.

• The Ajax Hub signalling central keeps a history of all events marked by the system.

• The Control panel notifies of the loss of external power as soon as a problem is detected.

• The housing of the smart alarm control panel is protected against opening by a tamper. In case of an attempt to dismantle or damage the panel, the user will receive an incident message.

We will do our best to deliver the goods on time. However, due to unforeseen circumstances beyond our control, delivery may be delayed.
Money for goods that are marked "On order" and ordered specifically for you are not refundable.